To determine the overall dimensions of the Essential Flush-Fitting Swing double door frame, the following simple formulas must be applied;
width dimension = L (opening width) + 130mm
height dimension = H (opening height) + 65mm
e.g., to have an opening width of 1200x2100mm, a space of 1330x2165mm is needed

Frames from the Essential Swing line can be installed in both masonry and plasterboard walls in the plaster version with a finished wall thickness of 105mm, in the plasterboard version 100mm suitable for interior partition walls formed by 8cm perforated brick and 75mm profile structures respectively

The Frames in the Essential Swing Plaster 90 plus and plasterboard 100/125 line can be installed in both masonry walls with minimum thickness of 90mm and above, in the plasterboard version they can be made with a thickness of between 100mm and 125mm

To determine the overall dimensions of the Essential Flush-Fitting Swing Single door frame, the following simple formulas must be applied;
width dimension = L (opening width) + 150mm
height dimension = H (opening height) + 75mm
e.g., to have an opening width of 800x2100mm, a space of 950x2175mm is needed

To determine the overall dimensions of the Essential Flush-Fitting Swing double door frame, the following simple formulas must be applied;
width dimension = L (opening width) + 150mm
height dimension = H (opening height) + 75mm
e.g., to have an opening width of 1200x2100mm, a space of 1350x2175mm is needed

Scrigno Essential counter frames in the plaster version with finished wall thickness of 105mm, 125mm are suitable for interior partition walls formed by 8/10 cm perforated bricks respectively

Scrigno Essential counter frames in the plasterboard version with finished wall thickness of 100mm, 125mm are suitable for interior partition walls formed by structures with 75 and 100mm profiles, respectively

Since this is a counter frame with a 54 mm internal space, the maximum recommended thickness of the door panel on this counter frame is 40 mm, and it must not have any raised panels or glass holder frames.

No, they are two structurally different counter frames.

In order for the screws to be the correct length, the finishing upright must be inserted into the structure upright and not mounted in the sit-on mode.

Assembly instructions for all Scrigno line products are easily downloaded from the website or you can request them directly from your Authorised Dealer.

To determine the overall dimensions of the Base single door counter frame, the following simple formulas must be applied;
width dimension= L (opening width) x 2 +110mm
height dimension=H (opening height) +100mm
e.g., to have an opening width of 800x2100mm, a space of 1710x2200mm is needed

To determine the overall dimensions of the Base double door counter frame, the following simple formulas must be applied;
width dimension= L (opening width) x 2 +120mm
height dimension=H(opening height) +100mm
e.g., to have an opening width of 1400x2100mm, a space of 2920x2200mm is needed

The size range of Scrigno counter frames includes heights from 800mm up to 2700mm in the plaster version and up to 2400mm in the plasterboard version.

In the Scrigno Gold Base counter frame, in addition to the door panel, there are the doorposts and edging trims too. In the Scrigno Gold Essential counter frame, the doorpost and edging trims have been eliminated by adopting aluminium profiles on which plaster or plasterboard is directly applied, blending with the wall: simply painting the profiles the same as the wall completes the final result.

All bare aluminium profiles should be painted, applying a primer coat and completing with simple wall paint.

To determine the overall dimensions of the Essential single door counter frame, the following simple formulas must be applied;
Width dimension=L(opening width) x 2 +120mm
height dimension=H(opening height) +65mm
e.g., to have an opening width of 800x2100mm, a space of 1720x2165mm is needed

To determine the overall dimensions of the Essential double door counter frame, the following simple formulas must be applied;
Width dimension=L(opening width) x 2 +120mm
height dimension=H(opening height) +65mm
e.g., to have an opening width of 1600x2100mm, a space of 3320x2165mm is needed

Scrigno counter frames in the plaster version with finished wall thicknesses of 90mm, 105mm, 125mm, 145mm are suitable for interior partition walls formed by 6/8/10/12 cm perforated bricks respectively

Scrigno counter frames in the plasterboard version with finished wall thicknesses of 100mm, 125mm are suitable for interior partition walls formed by structures with 75 and 100mm profiles, respectively

No, it is always advisable to use the counter frame in the specific double door version.

It is good practice to follow the instructions attached to the product; in particular, it is advisable to check the alignment, plumb and plane of the counter frame with respect to the supporting surface carefully. In masonry versions, the plastering should be done in two stages: in the first phase, reinforce the side of the case with cement mortar (minimum 20 percent cement) until it covers the wire mesh (about 1 cm); in the second, wait until the plastering has cured (minimum three weeks), even out the plaster to flush with the counter frame. Proceed with the finish rendering. The above steps must be done with the cover trim mounted to the case. All structures should always be architraved. In addition, in the case of the plasterboard versions, it is advisable to anchor the counter frame along the entire perimeter to the load-bearing structure of the wall, and the exclusive use of the screws supplied with the counter frame for attaching the plasterboard slab to it.

In plaster version counter frames, it is advisable to wait for the plaster to cure, about 29- 30 days

All structures should always be architraved.

Yes, the Essential line includes Flush-fitting Swing doors, in the Pusj, Pull versions both to the Left and Right, in both Standard and Non-Standard opening widths.